If you wear trousers and lose weight or your body shape changes, the trousers become baggy and difficult to wear. In that case, the belt will be loose, so you will need to tighten the waist or adjust it too much.

Also, there may be occasions when you wear a belt that is different from what you normally use, and at such times the length of the belt may not be adjusted. If you can't afford to drill or cut a hole, you can temporarily fix it with first aid.

This time, we will introduce first-aid measures when the belt is loose, how to stuff the waist in a different way (adjusting the excess), and countermeasures.

We will introduce first-aid measures when the belt is loose. If your trouser belt is loose, it's most likely because your waist is getting smaller, so use a belt as an emergency measure.

First of all, I usually put a belt through the buckle of my trousers and fasten it, but there are many cases where my body shape changed and I fixed it in place without realizing it, and it became loose. So, in that case, when you tighten the belt, tighten it slightly to prevent the pants from falling off.

As an emergency measure when the belt is loose, it is the easiest and least time consuming countermeasure, and it does not damage the product, so there is no need to think about it and make adjustments (stuffing method). Next, I would like to introduce a countermeasure method for trousers using [buttons].

A new button is sewn on the outside (opposite side of the zipper) from the original button. By doing so, you will be able to bring the buttonhole to the inside and fasten it, so you will be able to prevent your pants from slipping down.

Also, if the belt is loose, you can adjust the length by making a hole in the trouser belt or cutting it. .

We will introduce which is better, drilling or cutting, to adjust the length as an emergency measure when the belt is loose. Both methods of drilling and cutting holes in the trouser belt are time consuming and look unattractive if not done carefully.

In particular, if you fail to cut the belt due to the way the belt is stuffed (excessive adjustment), you will have to buy the belt again, which may be irreversible. In that respect, the emergency measure to make a hole is that even if you make a mistake in the place to make a hole, you just need to make a new hole, so you can take it back.

However, if there are too many holes in the trouser belt, it will look unattractive. So, when adjusting the length, I recommend that you work while referring to articles such as You Tube and stuffing (remainder adjustment).

If you cut the trouser belt as an emergency measure when the belt is loose, you may not be able to tighten the belt if your body becomes fat. So, even if the drilling fails, it's okay, and it can be undone, so I think the drilling is better as an emergency measure.

As an emergency measure when the belt is loose, we will introduce a different way of stuffing the waist (adjusting the excess). It is good that the length can be adjusted reliably by making holes in the trouser belt or cutting it, but there is also the risk of making mistakes or taking too much time when working on it.

Therefore, if the belt is loose, use a safety pin to adjust the waist and it will be finished quickly. If you are worried about durability, you can use multiple safety pins on your pants to prevent them from slipping off.

However, this is only an emergency measure when the belt is loose, so you will have to adjust the length and stuffing properly later. If it is a safety pin, it is economical because it does not cost anything because it is sold at 100 yen.

In addition, as an emergency measure when the belt is loose, it is recommended to wear a mesh belt as the length can be adjusted freely. With a mesh belt, you can deal with both thin and fat body types.

No cutting or drilling required and very easy to do. However, it is not good manners to use it in a business scene, so it is important to choose a belt that matches your TPO.

And you can't fix your trouser belt properly while doing the first aid. It may be fine in your private life, but if you wear imperfect clothes even at work, people around you will think you're a sloppy person, and your impression will be bad.

As an emergency measure when the belt is loose, we will introduce a countermeasure for adjusting the length when you cannot do it yourself. Many businessmen are too busy with their daily work to fix their trouser belts and how to stuff them properly (too much adjustment).

I think people who don't have time to spare generally do first aid when the belt is loose. For such people, even if the length of the trouser belt is adjusted as an emergency measure, there are some people who do not have enough time to fix it properly, and the time just goes by and they can not deal with it.

Therefore, if you cannot adjust the length of the belt yourself, we recommend that you have a professional repair shop resize your pants and belt. If possible, it is safer to have your suit repaired at the store where you purchased it, but there are places where you can have it remade at a major suit shop or clothing store in a department store.

It costs money, but I think it's safer to have them fix it than to do it yourself.

Here's a first aid method when both the belt and waist are loose. If your waist is prone to change, you will have to adjust the length of your trouser belt every time it changes its position.

So, if your stomach shape changes easily, you can easily adjust the length of the belt by wearing a waistband and adding thickness to your waist. What's more, since the warmer is worn inside the clothes, it is difficult for others to notice, and it is an easy first aid method.

If both the belt and waist are loose, I think you can deal with it to some extent by wearing layers such as a warmer, underwear, or heat tech. Also, for people whose body shape changes quickly, it is recommended to wear products that use rubber for pants instead of using a belt.

A durable business belt.

It is the strongest belt that sticks to all materials, sewing and design.

Made from Pole Bear, a groundbreaking natural waterproof leather developed over many years in the UK, it has excellent strength and strong water resistance, so it is built to last.

The buckle part and the belt leather part can be removed, so you can easily adjust the size.

・Product name: Strongest belt ・Size: M size (recommended waist size up to 95cm) 108mm/L size (recommended waist size up to 110cm) 123mm *Adjustable size ・Color: Black/Brown ・Country of origin: Japan ・Material: Pole bear waterproof natural leather (genuine leather)

It is a long belt in pursuit of appearance and usability.

It's not just a long belt, it's a design-oriented design, and it's long but stylish.

You can choose from 8 designs x 2 colors and a wide variety of variations.

You can easily cut it, so you can also adjust the size.

・Product name: Long belt [up to 140 cm]
・Size: Obi total length approx. 150cm (Waist maximum 140cm) / Obi width 3.4cm
・Material: Cowhide (front) / Synthetic leather (back)

When the belt is loose, using a safety pin or using a mesh belt is the easiest first aid method.

However, mesh belts are not suitable for business situations, so you have to wear a belt that matches your TPO. There are other methods such as drilling holes and cutting, but there are times when it fails, so if you have time to spare, we recommend that you go to the nearest clothing store or suit shop to have it repaired.

What is the first aid when the belt is loose? Introducing unusual waist stuffing (excess adjustment) and countermeasures

I tried to summarize.