ベルトの長さ調整(メンズ版)|ズボンベルト穴あけ以外の対処法!実は◯◯ベルトが最強_top

Adjusting the length of the belt (men's version) | Solution other than drilling holes in the trouser belt! In fact, the ◯◯ belt is the strongest

I think men wear trousers more often than women, but wearing a belt makes you look better and makes walking easier.

Trouser belts are not very conspicuous among fashion items and coordination, but women pay close attention to men's fashion.

Therefore, it is a mistake to disregard it as just a belt.

Women tend to pay attention to small items, especially small items, in men's fashion coordination, so you should also pay attention to belts that play a supporting role.

However, many people may want to adjust the length by drilling or cutting as their body shape changes when using a men's belt.

This time, we will introduce how to adjust the length of the belt (men's version), other than making holes in the trouser belt, and recommended belts.

■Belt length adjustment (men's version)|Mesh belt with free size adjustment!

Belt length adjustment (men's version) allows you to freely adjust the size of the trouser belt, which is a mesh belt.

You don't have to worry about drilling or cutting, so you can easily adjust the size.

Mesh belts are woven in a mesh pattern, and pin buckles are often used, but trouser belts do not have holes for clasps or tension.

Therefore, you can freely adjust the length of the belt to your favorite position, so it is recommended for men whose body shape changes easily.

There are fashionable mesh belts made of wool, rubber, and cotton, and leather belts are popular.

However, please note that the length of the trouser belt itself cannot be changed after purchase, as the length cannot be adjusted by cutting the belt.

If you buy a mesh belt that is too long, it will be too long for men with a thin body, and it will look flimsy or slovenly.

Many people have multiple trouser belts.

Therefore, it is recommended to keep a mesh belt as a spare.

Also, if you usually use other belts with holes or metal fittings, and if you need to adjust the length of the belt due to changes in your body shape, why not try making holes or cutting it? .

That way, even if you fail to adjust the size, as long as you have at least one mesh belt that can be adjusted at any time, you can use it with confidence for emergencies.

■ Belt length adjustment (men's version) | Which is better, drilling or cutting?

We will introduce which is better, drilling or cutting, for belt length adjustment (men's version).

If you are new to drilling or cutting trouser belts, you may find both methods difficult.

The important thing is not to adjust the length of your existing belt right away, but always put on the pants you usually wear, and then put the belt you want to adjust through the belt loop and adjust the size. please.

If you just wrap it around your waist without putting it through your pants, you may end up cutting it to the wrong size or making a hole in the wrong place.

And even if you make a mistake when making a hole in the belt length adjustment (men's version), it won't be too noticeable, and you can adjust the length by making another hole.

However, if you cut the belt incorrectly or cut it too short, it will be irreversible.

Therefore, for men who adjust the length of the belt for the first time, it is better to make a hole in the belt.

In that case, we recommend that people who are fat or thin and their body shape changes easily, have 2-3 holes to allow for size fluctuations.

If you are afraid of drilling or cutting your own trouser belt, ask your nearest shoe repair shop or clothing store to adjust the length of the belt.

■Belt length adjustment (men's version) |

We will introduce which is better, the hole type or the metal type for adjusting the length of the belt (men's version).

For men's belts that allow size adjustment, the metal fittings that secure the buckle and the belt can be removed.

There are also types with holes in the belt itself, and types with metal fittings that tighten the trouser belt with metal fittings without holes.

To adjust the length of the belt, you have to remove the buckle.

You can also adjust the length of the trouser belt and buckle fixed type with screws.

However, it may be a little difficult for beginners to adjust the length of the belt (men's version) because it is necessary to make new screw holes after cutting the belt.

On the other hand, the type that is difficult to adjust the size yourself is the one where the buckle and belt are fixed with pins or sewn.

These require special machines and tools, so be careful not to do it easily if you don't have the tools.

For belt length adjustment (men's version), between the hole type and the metal fitting type, the hole type trouser belt uses a drill without removing the above accessory parts, and you can open a hole according to your body shape. I recommend it because there are things that can be done.

■ Belt length adjustment (men's version) | What to do when the length of the trouser belt is too long

Here's how to adjust the length of the belt (men's version) when the trouser belt is too long.

Many people buy a belt that suits them and have fun wearing it, but the waist is too thin and the length of the belt is left over.

The length of the trouser belt can be adjusted by drilling or cutting, but if it is about 5cm, it is best to make a hole in the belt.

However, if the men's belt is longer than that, it would be better to cut the belt and shorten the overall length.

At that time, to adjust the length of the belt (men's version), cut the buckle side of the trouser belt and attach a new buckle.

At this time, please be aware that if the length of stuffing is too short, the hole that was originally opened in the buckle will remain.

Adjusting the length of the belt often does not work well for beginners, so if you are worried about it, it is safer to bring it to a shoe repair shop or clothing store to have it adjusted. hey.

Adjusting the length of the belt (men's version) | Is there a method other than cutting or punching a hole in the trouser belt?

We will introduce methods other than cutting the belt and drilling holes in the belt length adjustment (men's version).

Some men are afraid to fix their belts by themselves.

For such people, if you use [mesh type, suspenders, rubber material belt], etc., it is recommended that you do not need to cut or drill holes even if your body shape changes.

Also, if you have one of the above, you can use it in an emergency even if you make a mistake when reworking other belts, so why not buy one as a spare.

■ Summary of belt length adjustment (men's version)

There are various types of belts, from those that require a tool such as a screwdriver to remove the buckle, to those that can be easily removed by hand.

If you are afraid of drilling or cutting by yourself, please consult with a shoe repair shop or clothing store as they may be able to carefully adjust the length.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.